One of the most frequent questions we get from customers is “What’s the difference between pipe and tube”? Although pipes and tubes may look similar, they are in fact quite different in nomenclature and sizing. Remember that pipes and tubes are rarely interchangeable. Here are some of the main differences between the two products.
Pipes are always round in shape. Tubes can be square, rectangular or round, as shown in the image to the right.
Tube is stronger than pipe.
Tube is available in hot rolled steel and cold rolled steel. Pipe is typically black steel (hot rolled). Both items can be galvanized.
Although copper and brass tubes can be shaped relatively easily, tubes are are typically rigid. Pipes, on the other hand, are invariably rigid and cannot be shaped
without special equipment.
Pipe is typically available in larger sizes than tube.
Only pipes are pressure rated and intended to be used for the transference of fluids or gas. Tubes, on the other hand, are used in structural applications.
Tube can be telescoped. Remember to account for the flash weld inside the tube. Pipe, on the other hand, does not have a flash weld.
DOM (Drawn over Mandrel) Tube is the best material for telescoping because the inside flash weld has been removed.
Pipes are only provided with an inside (nominal) diameter and a “schedule” (which means wall thickness).
There’s an easy way to remember this: since pipe is used to transfer fluids or gas, the size of the opening through which the fluids or gas
can pass through is probably more important to you than the outer dimensions of the pipe. Tube measurements, on the other hand,
are provided as an outside diameter and set ranges of wall thickness.
Guest contributors are welcome at the Alloy Wiki.It is a weekly wiki and guide on alloy information and processing technology, while also about the vast array of opportunities that are present in manufacturing. Our team of writers consists of a Machining Material Supplier / Machinist / Tool and Die Maker, a Biomedical Engineer / Product Development Engineer, a Job Development Coordinator / Adjunct Professor, and a President and CEO of a manufacturing facility.
Link to this article：What’s the difference between pipe and tube?
Reprint Statement: If there are no special instructions, all articles on this site are original. Please indicate the source for reprinting:Alloy Wiki，thanks