What are the requirements for precision hardware

Precision metal stamping parts are stamped from non-ferrous metals and other materials into the required shape and size by external force, and then cut and separated. The materials, stamping dies and stamping equipment of the stamping parts are important factors to ensure their quality.

The precision stamping parts have higher requirements on the shape, flatness, precision and performance of the stamping parts. Therefore, in addition to the hardware conditions, the precision metal stamping parts also have strict requirements on their processing and production processes.

Most of them know that precision metal stamping parts, in addition to meeting the material requirements of customers, require higher precision of stamping parts. These are all technical requirements. First of all, when designing stamping parts molds, the thickness of the material, the height of drawing, and the height of drawing must be considered. Diameter and other issues must have precise calculations and designs, while also taking into account the properties of the material, the physical reactions and properties that occur during the stamping process, and the final forming and performance requirements of the stamping parts.

The second is the requirement of accuracy. The precision of precision metal stamping parts can reach the micron level. However, for precision metal stamping parts with complex shapes, the measurement accuracy requirements and equipment are very important, so in the process of precision metal stamping parts processing and production , Can not ignore the accuracy detection of precision stamping parts.

Link to this article:What are the requirements for precision hardware

Reprint Statement: If there are no special instructions, all articles on this site are original. Please indicate the source for reprinting:Mold Wiki,Thanks!^^

Bolts are used for fastening in machinery, construction, and electrical industries. One end is a hexagon head for wrench fastening, and the other end is a thread. The length of the thread varies accor…

High-strength bolts can bear a larger load than ordinary bolts of the same specification. The material of ordinary bolts is made of Q235 (that is, A3). The material of high-strength bolts is 35# steel…

What kind of oil is used for aluminum stamping? Should I use fast-drying aluminum stamping oil, slow-drying special oil for aluminum stamping, or non-volatile aluminum stamping oil? This need is speci…

Before stamping, the stamping parts are leveled and then stamped. Not only the feeding precision is high, but also the flatness will be better. Flatness refers to the deviation of the height of the ma…

First, deep drawing: a stamping process in which straight wool or process parts are turned into hollow parts, or the hollow parts are further changed in shape and size. During deep drawing, the hollow…

The surface and internal properties of the sheet metal used for stamping have a great impact on the quality of the stamping product. The thickness of the stamping material is required to be accurate a…

(1) Select the installation reference parts. When installing, first select the reference parts. The principle of selecting reference parts is to determine according to the dependence of the main mold …

1. Draw drawings to determine output Whether metal or plastic mold parts are produced, the drawings and production output need to be determined before production. This step is to determine which produ…

1. stamping die design. The raw material of aluminum stamping parts, aluminum, is relatively soft. When stamping parts are used for stamping, it is easy to cause material blocking. Therefore, when des…

The size and shape of the process incision depends on the area in which it is located and the requirements for external supplementary materials. Generally, the following principles should be followed:…

(1) According to the drawing of the workpiece, analyze the shape characteristics, size, precision requirements, raw material size and mechanical properties of the workpiece, and combine factors such a…

(1) Since silicon steel plate is a material that is relatively easy to stretch, low-viscosity stamping oil will be used on the premise of preventing scratches for the easy cleaning of the finished wor…

Author: Moldwiki