What are the characteristics of stamping operations

  • 1. High production efficiency The number of parts or process content completed per unit time is several times higher than that of general cnc machining methods, or even hundreds to thousands of times. Moreover, the metal stamping process can also use one mold with multiple parts and multiple process content combined cnc machining methods on a set of molds to further improve production efficiency.
  • 2. The product quality is stable and the interchangeability is good. The metal stamping mold is used to form the product, and the factors that affect the product quality change are few, and the degree of harm is low. Some factors can be corrected by taking appropriate measures to control the quality of the product within the ideal range, and the stability of the product quality can effectively ensure its interchangeability. Good interchangeability is the basic guarantee for mass production of the assembly line. At the same time, it is also conducive to product maintenance and replacement.
  • 3. High material utilization. Different layout methods, such as cross, diagonal, multi-row, mixed, nested, and even no-waste layout methods, can effectively improve the utilization rate of materials and reduce the material cost of products.
  • 4. The material does not need to be heated. Under normal circumstances, the material does not need to be heated during the stamping operation. This not only saves energy, reduces heating equipment and site occupation, but also avoids shape and size instability caused by surface oxidation, burns, and deformation of products caused by heating. It can also prevent the adverse effects of temperature rise on the mold.
  • 5. The mechanical properties of the punching parts are improved. Affected by the hardening phenomenon of metal stamping, the surface structure of the punching parts is tight, the hardness and wear resistance are increased, and the strength and rigidity of the punching parts are also improved.
  • 6. ​​A wide range of applications. There are many products suitable for stamping. It can solve many cnc machining contents that are impossible or difficult to complete by general mechanical processing, especially for the processing and forming of some thin, soft, difficult, strange, micro parts, or non-metallic material parts. Metal stamping is almost the only cnc machining method.

Link to this article:What are the characteristics of stamping operations

Reprint Statement: If there are no special instructions, all articles on this site are original. Please indicate the source for reprinting:Mold Wiki,Thanks!^^

Bolts are used for fastening in machinery, construction, and electrical industries. One end is a hexagon head for wrench fastening, and the other end is a thread. The length of the thread varies accor…

High-strength bolts can bear a larger load than ordinary bolts of the same specification. The material of ordinary bolts is made of Q235 (that is, A3). The material of high-strength bolts is 35# steel…

What kind of oil is used for aluminum stamping? Should I use fast-drying aluminum stamping oil, slow-drying special oil for aluminum stamping, or non-volatile aluminum stamping oil? This need is speci…

Before stamping, the stamping parts are leveled and then stamped. Not only the feeding precision is high, but also the flatness will be better. Flatness refers to the deviation of the height of the ma…

First, deep drawing: a stamping process in which straight wool or process parts are turned into hollow parts, or the hollow parts are further changed in shape and size. During deep drawing, the hollow…

The surface and internal properties of the sheet metal used for stamping have a great impact on the quality of the stamping product. The thickness of the stamping material is required to be accurate a…

(1) Select the installation reference parts. When installing, first select the reference parts. The principle of selecting reference parts is to determine according to the dependence of the main mold …

1. Draw drawings to determine output Whether metal or plastic mold parts are produced, the drawings and production output need to be determined before production. This step is to determine which produ…

1. stamping die design. The raw material of aluminum stamping parts, aluminum, is relatively soft. When stamping parts are used for stamping, it is easy to cause material blocking. Therefore, when des…

Precision metal stamping parts are stamped from non-ferrous metals and other materials into the required shape and size by external force, and then cut and separated. The materials, stamping dies and …

The size and shape of the process incision depends on the area in which it is located and the requirements for external supplementary materials. Generally, the following principles should be followed:…

(1) According to the drawing of the workpiece, analyze the shape characteristics, size, precision requirements, raw material size and mechanical properties of the workpiece, and combine factors such a…

Author: Moldwiki