What are the advantages of stamping parts

  • (1) stamping parts manufacturers have high production efficiency in stamping processing, and they are easy to operate and easy to realize mechanization and automation. This is because stamping relies on punching dies and stamping equipment to complete the processing. The number of strokes of ordinary presses can reach dozens of times per minute. The high-speed pressure of stamping parts manufacturers can reach hundreds or even more than a thousand times per minute, and It is possible to get a punched part in one punching stroke.
  • (2) When stamping parts manufacturers are stamping, because the mold guarantees the size and shape accuracy of the stamping parts, and generally does not damage the surface quality of the stamping parts, and the life of the mold is generally longer, the quality of the stamping is stable and the interchangeability is good. It has the characteristics of “just the same”.
  • (3) Stamping parts manufacturers can process parts with a large size range and more complex shapes, such as stopwatches as small as clocks and clocks, as large as automobile longitudinal beams, covering parts, etc., plus the cold deformation and hardening effect of the materials during stamping. The punching strength and rigidity are both high.
  • (4) Stamping parts manufacturers generally do not produce chips or scraps, consume less material, and do not need other heating equipment. Therefore, stamping parts manufacturers are a material-saving and energy-saving processing method, and the cost of stamping parts is lower. .

Link to this article:What are the advantages of stamping parts

Reprint Statement: If there are no special instructions, all articles on this site are original. Please indicate the source for reprinting:Mold Wiki,Thanks!^^

Bolts are used for fastening in machinery, construction, and electrical industries. One end is a hexagon head for wrench fastening, and the other end is a thread. The length of the thread varies accor…

High-strength bolts can bear a larger load than ordinary bolts of the same specification. The material of ordinary bolts is made of Q235 (that is, A3). The material of high-strength bolts is 35# steel…

What kind of oil is used for aluminum stamping? Should I use fast-drying aluminum stamping oil, slow-drying special oil for aluminum stamping, or non-volatile aluminum stamping oil? This need is speci…

Before stamping, the stamping parts are leveled and then stamped. Not only the feeding precision is high, but also the flatness will be better. Flatness refers to the deviation of the height of the ma…

First, deep drawing: a stamping process in which straight wool or process parts are turned into hollow parts, or the hollow parts are further changed in shape and size. During deep drawing, the hollow…

The surface and internal properties of the sheet metal used for stamping have a great impact on the quality of the stamping product. The thickness of the stamping material is required to be accurate a…

(1) Select the installation reference parts. When installing, first select the reference parts. The principle of selecting reference parts is to determine according to the dependence of the main mold …

1. Draw drawings to determine output Whether metal or plastic mold parts are produced, the drawings and production output need to be determined before production. This step is to determine which produ…

1. stamping die design. The raw material of aluminum stamping parts, aluminum, is relatively soft. When stamping parts are used for stamping, it is easy to cause material blocking. Therefore, when des…

Precision metal stamping parts are stamped from non-ferrous metals and other materials into the required shape and size by external force, and then cut and separated. The materials, stamping dies and …

The size and shape of the process incision depends on the area in which it is located and the requirements for external supplementary materials. Generally, the following principles should be followed:…

(1) According to the drawing of the workpiece, analyze the shape characteristics, size, precision requirements, raw material size and mechanical properties of the workpiece, and combine factors such a…

Author: Moldwiki