The main process of mould parts production


1. Draw drawings to determine output

Whether metal or plastic mold parts are produced, the drawings and production output need to be determined before production. This step is to determine which products will be used for the parts produced in the future, or which manufacturers will be supplied for assembly. Entering the equipment, it will be directly mass-produced. Modifications in the middle will not only waste parts but also cause delays in the construction period;

2. Select equipment to determine process

The second step is to determine the equipment and technology required for the parts. The production of mold parts should be based on the size, shape, material and other aspects to choose different equipment and processes. The more well-known domestic mold parts factories will have at least three or more. The production equipment and process flow, so as long as the accessories are not too high-precision, they can be handed over to domestic manufacturers for processing;

3. Write a program input device

After the drawings, output, equipment, and technology are determined, it is necessary to write processing procedures for specific equipment. The factory has engineers specialized in writing procedures to operate the equipment. After the compilation is completed, the team will review and modify the procedures. To ensure that the written program is correct, the production of plastic mold parts can be carried out smoothly; in addition, after the processing program is written, the machine will be trial-produced, and the required materials will be imported into the equipment and let the machine proceed under the pre-set conditions. After a series of processing, the model will be modified and reprocessed after the test is successful to improve the process. After this series of work is completed, the mold parts will be mass-produced to ensure that the mold production is foolproof.

Link to this article:The main process of mould parts production

Reprint Statement: If there are no special instructions, all articles on this site are original. Please indicate the source for reprinting:Mold Wiki,Thanks!^^

Bolts are used for fastening in machinery, construction, and electrical industries. One end is a hexagon head for wrench fastening, and the other end is a thread. The length of the thread varies accor…

High-strength bolts can bear a larger load than ordinary bolts of the same specification. The material of ordinary bolts is made of Q235 (that is, A3). The material of high-strength bolts is 35# steel…

What kind of oil is used for aluminum stamping? Should I use fast-drying aluminum stamping oil, slow-drying special oil for aluminum stamping, or non-volatile aluminum stamping oil? This need is speci…

Before stamping, the stamping parts are leveled and then stamped. Not only the feeding precision is high, but also the flatness will be better. Flatness refers to the deviation of the height of the ma…

First, deep drawing: a stamping process in which straight wool or process parts are turned into hollow parts, or the hollow parts are further changed in shape and size. During deep drawing, the hollow…

The surface and internal properties of the sheet metal used for stamping have a great impact on the quality of the stamping product. The thickness of the stamping material is required to be accurate a…

(1) Select the installation reference parts. When installing, first select the reference parts. The principle of selecting reference parts is to determine according to the dependence of the main mold …

1. stamping die design. The raw material of aluminum stamping parts, aluminum, is relatively soft. When stamping parts are used for stamping, it is easy to cause material blocking. Therefore, when des…

Precision metal stamping parts are stamped from non-ferrous metals and other materials into the required shape and size by external force, and then cut and separated. The materials, stamping dies and …

The size and shape of the process incision depends on the area in which it is located and the requirements for external supplementary materials. Generally, the following principles should be followed:…

(1) According to the drawing of the workpiece, analyze the shape characteristics, size, precision requirements, raw material size and mechanical properties of the workpiece, and combine factors such a…

(1) Since silicon steel plate is a material that is relatively easy to stretch, low-viscosity stamping oil will be used on the premise of preventing scratches for the easy cleaning of the finished wor…

Author: Moldwiki