The main points of the design of the metal mold cavity

The main point of the design of the metal mold cavity is to avoid the blanking waste from accumulating in the cavity of the cavity. The problem with the main point lies in the large blanking force required and the conflicting punching force.

Pay attention to the strength of the die. Generally, the die insert is enlarged by more than 5mm on one side of the stamping shape;

Also pay attention to the fool-proof of special-shaped parts. A large or small R angle is designed on the 4 R angles of the insert to prevent the wrong direction assembly.

In the steel plate specification, whether it is a fixed-length plate or a coiled plate, the same material and material thickness have different roll widths and different selling prices.

Therefore, in order to reduce the cost of metal stamping processing, it is necessary to start from the perspective of formulating the width of the purchase volume, and under the premise of ensuring the utilization of materials, without increasing the price, try to choose the volume width range. If the size of the fixed-size plate is appropriately selected, after the punching is completed, it is not necessary to perform secondary shearing to reduce the cutting cost.

For coils, please try to select the coil forming specifications and unwinding forming process, and reduce the number of times, reduce the workload, and improve work efficiency.

Link to this article:The main points of the design of the metal mold cavity

Reprint Statement: If there are no special instructions, all articles on this site are original. Please indicate the source for reprinting:Mold Wiki,Thanks!^^

Bolts are used for fastening in machinery, construction, and electrical industries. One end is a hexagon head for wrench fastening, and the other end is a thread. The length of the thread varies accor…

High-strength bolts can bear a larger load than ordinary bolts of the same specification. The material of ordinary bolts is made of Q235 (that is, A3). The material of high-strength bolts is 35# steel…

What kind of oil is used for aluminum stamping? Should I use fast-drying aluminum stamping oil, slow-drying special oil for aluminum stamping, or non-volatile aluminum stamping oil? This need is speci…

Before stamping, the stamping parts are leveled and then stamped. Not only the feeding precision is high, but also the flatness will be better. Flatness refers to the deviation of the height of the ma…

First, deep drawing: a stamping process in which straight wool or process parts are turned into hollow parts, or the hollow parts are further changed in shape and size. During deep drawing, the hollow…

The surface and internal properties of the sheet metal used for stamping have a great impact on the quality of the stamping product. The thickness of the stamping material is required to be accurate a…

(1) Select the installation reference parts. When installing, first select the reference parts. The principle of selecting reference parts is to determine according to the dependence of the main mold …

1. Draw drawings to determine output Whether metal or plastic mold parts are produced, the drawings and production output need to be determined before production. This step is to determine which produ…

1. stamping die design. The raw material of aluminum stamping parts, aluminum, is relatively soft. When stamping parts are used for stamping, it is easy to cause material blocking. Therefore, when des…

Precision metal stamping parts are stamped from non-ferrous metals and other materials into the required shape and size by external force, and then cut and separated. The materials, stamping dies and …

The size and shape of the process incision depends on the area in which it is located and the requirements for external supplementary materials. Generally, the following principles should be followed:…

(1) According to the drawing of the workpiece, analyze the shape characteristics, size, precision requirements, raw material size and mechanical properties of the workpiece, and combine factors such a…

Author: Moldwiki