ST STM32F103xx STEVAL-CCM001V2 Image Solutions

ST’s STEVAL-CCM001V2 image” title=”image”>image solution is to use STM32F103″ title=”STM32F103″>STM32F103xC, STM32F103xD or STM32F103xE 32-bit MCU, using ARM® Cortex™-M3 RISC core, operating frequency 72MHz, With 256-512KB flash memory, USB.CAN and 1 timer, 3 ADCs and 13 communication interfaces, working voltage 2.0 to 3.6V, working temperature -40 to +105 ℃, mainly used in motor drive and application control, Medical and handheld devices, PC peripherals and GPS platforms, industrial applications, PLCVs, frequency converters, printers and scanners as well as alarm systems, video interconnects and HVAC. This article describes the STM32F103xC, STM32F103xD and STM32F103xE main features, block diagrams, clock trees and Power scheme, as well as main features and circuit diagram of STEVAL-CCM001V2 image demo board.

The STM32F103xC, STM32F103xD and STM32F103xE performance line family incorporates the high-performance ARM® Cortex™-M3 32-bit RISC core operating at a 72 MHz frequency, high-speed embedded memories (Flash memory up to 512 Kbytes and SRAM up to 64 Kbytes ), and an extensive range of enhanced I/Os and peripherals connected to two APB buses. All devices offer three 12-bit ADCs, four general-purpose 16-bit timers plus two PWM timers, as well as standard and advanced communication interfaces: up to two I2Cs, three SPIs, two I2Ss, one SDIO, five USARTs, an USB and a CAN.

The STM32F103xx high-density performance line family operates in the –40 to +105 ℃temperature range, from a 2.0 to 3.6 V power supply. A comprehensive set of power-saving mode allows the design of low-power applications.

The STM32F103xx high-density performance line family offers devices in six different package types: from 64 pins to 144 pins. Depending on the device chosen, different sets of peripherals are included, the description below gives an overview of the complete range of peripherals proposed in this family.

These features make the STM32F103xx high-density performance line microcontroller family suitable for a wide range of applications:

● Motor drive and application control

● Medical and handheld equipment

● PC peripherals gaming and GPS platforms

● Industrial applications, PLC, inverters, printers, and scanners

● Alarm systems, video intercom, and HVAC

Main features of STM32F103xx:

■ Core: ARM 32-bit Cortex™-M3 CPU

– 72 MHz maximum frequency, 1.25 DMIPS/MHz (Dhrystone 2.1) performance at 0 wait state memory access

– Single-cycle multiplication and hardware division

■ Memories

– 256 to 512 Kbytes of Flash memory

– up to 64 Kbytes of SRAM

– Flexible static memory controller with 4 Chip Select. Supports Compact Flash,SRAM, PSRAM, NOR and NAND memories

– LCD parallel interface, 8080/6800 modes

■ Clock, reset and supply management

– 2.0 to 3.6 V application supply and I/Os

– POR, PDR, and programmable voltage detector (PVD)

– 4-to-16 MHz crystal oscillator

– Internal 8 MHz factory-trimmed RC

– Internal 40 kHz RC with calibration

– 32 kHz oscillator for RTC with calibration

■ Low power

– Sleep, Stop and Standby modes

– VBAT supply for RTC and backup registers

■ 3 × 12-bit, 1 μs A/D converters (up to 21 channels)

– Conversion range: 0 to 3.6 V

– Triple-sample and hold capability

– Temperature sensor

■ 2 × 12-bit D/A converters

■ DMA: 12-channel DMA controller

– Supported peripherals: timers, ADCs, DACs, SDIO, I2Ss, SPIs, I2Cs and USARTs

■ Debug mode

– Serial wire debug (SWD) & JTAG interfaces

– Cortex-M3 Embedded Trace Macrocell™

■ Up to 112 fast I/O ports

– 51/80/112 I/Os, all mappable on 16 external interrupt vectors and almost all 5 V-tolerant

■ Up to 11 timers

– Up to four 16-bit timers, each with up to 4 IC/OC/PWM or pulse counter and quadrature (incremental) encoder input

– 2 × 16-bit motor control PWM timers with dead-time generation and emergency stop

– 2 × watchdog timers (Independent and Window)

– SysTick timer: a 24-bit downcounter

– 2 × 16-bit basic timers to drive the DAC

■ Up to 13 communication interfaces

– Up to 2 × I2C interfaces (SMBus/PMBus)

– Up to 5 USARTs (ISO 7816 interface, LIN, IrDA capability, modem control)

– Up to 3 SPIs (18 Mbit/s), 2 with I2S interface multiplexed

– CAN interface (2.0B Active)

– USB 2.0 full speed interface

– SDIO interface

■ CRC calculation unit, 96-bit unique ID

■ ECOPACK® packages
ST STM32F103xx STEVAL-CCM001V2 Image Solutions
Figure 1. STM32F103xx series block diagram
ST STM32F103xx STEVAL-CCM001V2 Image Solutions
Figure 2. STM32F103xx series clock tree block diagram
ST STM32F103xx STEVAL-CCM001V2 Image Solutions
Figure 3. STM32F103xx series power supply block diagram

STEVAL-CCM001V2 Image Demo Board

Graphic panel demonstration board based on the STM32

The STM32-based STEVAL-CCM001V2 graphic panel demonstration board displays images oneby- one in a slideshow fashion. The heart of this board is the STM32 microcontroller, which is capable of reading a memory card containing photographs, and Display them on a TFT screen. The memory used to store the images is a microSD card. A 3-axis MEMS accelerometer is used for picture orientation. With the growing popularity of digital cameras and cellular phones with high-pixel photo capability, it is becoming more common for people to store digital photos in storage media rather than producing prints. Digital photo frames are an ideal solution to preview digital images. Bundling image display solutions with the STM32 shows the capability of this microcontroller in the world of multimedia. Additional features of the board include display of room temperature, date and time, a touchscreen-based keypad as user interface, USB mass storage, ZigBee® and a rechargeable battery system.

The application can be used either as a standalone solution, or combined with other
applications such as POS, card readers, security panels, USB speakers or high-end remote controls.

Main features of STEVAL-CCM001V2 image demo board:

■ Microcontroller: STM32-HD (64 KB RAM)

■ 320 x 240 resolution parallel TFT screen using FSMC peripheral for faster display

■ Bluetooth module footprint

■ Touchscreen for user interface

■ ZigBee® for picture transfer

■ STM32-based RTC available to display date/time and calendar

■ MEMS device to rotate the image based on TFT position

■ MicroSD card interfaced through SDIO

■ USB Mini-B connector

■ PC connectivity

■ User-programmable time interval for photo display

■ Senses temperature and displays data on TFT

■ On-board power supply for DPF

■ Rechargeable battery circuit available

■ On-board JTAG connector for firmware upgrade and modifications

■ Additional ESD protection device for USB and SD card

■ RoHS compliant
ST STM32F103xx STEVAL-CCM001V2 Image Solutions
Figure 4. STEVAL-CCM001V2 Image Demo Board Outline Drawing
ST STM32F103xx STEVAL-CCM001V2 Image Solutions
Figure 5. STEVAL-CCM001V2 Image Demo Board Circuit Diagram: MCU Section
ST STM32F103xx STEVAL-CCM001V2 Image Solutions
Figure 6. STEVAL-CCM001V2 Image Demo Board Circuit Diagram: Connector Section (TFT, microSD, JTAG, Temperature Sensor, ZigBee, Bluetooth, Touchpad Connector)
ST STM32F103xx STEVAL-CCM001V2 Image Solutions
Figure 7. STEVAL-CCM001V2 Image Demo Board Circuit Diagram: Power, MEMS and USB

Figure 8. STEVAL-CCM001V2 Image Demo Board Circuit Diagram: S-Touch Key Section
For details, see:
http://www.st.com/stonline/products/literature/ds/14611/stm32f103ve.pdf
and
http://www.st.com/stonline/books/pdf/docs/17002.pdf

The Links:   EW32F10NCW SP14N02L6ALCZ LCDDISPLAY

Author: Yoyokuo