Introduction to the processing points of aluminum stamping parts

  • 1. stamping die design. The raw material of aluminum stamping parts, aluminum, is relatively soft. When stamping parts are used for stamping, it is easy to cause material blocking. Therefore, when designing stamping parts molds, it is necessary to consider the position, and the gap should be required when installing stamping parts molds on the stamping equipment. Relax, this can reduce this situation.
  • 2. Cleaning of stamping equipment. Due to the particularity of the material, aluminum stamping parts are important in the processing and production process, and the appearance is easily lost. Therefore, when the stamping equipment is stamped, it is necessary to clean up the factors that may affect the appearance of the stamping parts in time. Avoid appearance damage of aluminum stamping parts.
  • 3. Reasonable installation process. Aluminum stamping parts are susceptible to damage due to material factors. Therefore, in the stamping process, stamping, bending, punching and other processes must be reasonable and safe to avoid damage to the front end of the product. Secondly, aluminum stamping parts must be protected during processing, such as filming or electroplating, so that appearance damage such as scratches can be avoided during the processing of aluminum stamping parts.

Link to this article:Introduction to the processing points of aluminum stamping parts

Reprint Statement: If there are no special instructions, all articles on this site are original. Please indicate the source for reprinting:Mold Wiki,Thanks!^^

Bolts are used for fastening in machinery, construction, and electrical industries. One end is a hexagon head for wrench fastening, and the other end is a thread. The length of the thread varies accor…

High-strength bolts can bear a larger load than ordinary bolts of the same specification. The material of ordinary bolts is made of Q235 (that is, A3). The material of high-strength bolts is 35# steel…

What kind of oil is used for aluminum stamping? Should I use fast-drying aluminum stamping oil, slow-drying special oil for aluminum stamping, or non-volatile aluminum stamping oil? This need is speci…

Before stamping, the stamping parts are leveled and then stamped. Not only the feeding precision is high, but also the flatness will be better. Flatness refers to the deviation of the height of the ma…

First, deep drawing: a stamping process in which straight wool or process parts are turned into hollow parts, or the hollow parts are further changed in shape and size. During deep drawing, the hollow…

The surface and internal properties of the sheet metal used for stamping have a great impact on the quality of the stamping product. The thickness of the stamping material is required to be accurate a…

(1) Select the installation reference parts. When installing, first select the reference parts. The principle of selecting reference parts is to determine according to the dependence of the main mold …

1. Draw drawings to determine output Whether metal or plastic mold parts are produced, the drawings and production output need to be determined before production. This step is to determine which produ…

Precision metal stamping parts are stamped from non-ferrous metals and other materials into the required shape and size by external force, and then cut and separated. The materials, stamping dies and …

The size and shape of the process incision depends on the area in which it is located and the requirements for external supplementary materials. Generally, the following principles should be followed:…

(1) According to the drawing of the workpiece, analyze the shape characteristics, size, precision requirements, raw material size and mechanical properties of the workpiece, and combine factors such a…

(1) Since silicon steel plate is a material that is relatively easy to stretch, low-viscosity stamping oil will be used on the premise of preventing scratches for the easy cleaning of the finished wor…

Author: Moldwiki