How To Use silicone Cupcake Molds?
Step 1. After each use, use hot water or diluted edible detergent to clean in the dishwasher. Do not use abrasive detergent or foam to clean. Make sure that the silicone cupcake molds is thoroughly dried before each use and before storage.
Step 2: When baking, the silicone cupcake molds should be opened on the flat baking tray. Don't let the molds be dry-baked. For example, for a six-mold, you only fill 3 molds, and the other 3 molds must be filled with water. Otherwise, the mold will burn out and the service life will be reduced. In order to achieve the best baking effect for the baked product, lightly spray a small amount of anti-stick baking pan oil on the surface of the silicone cake mold before baking.
Step 3. When the baking is completed, remove the entire baking pan from the oven and place the baked products on the grid to be cooled until they are completely cold.
Step 4. Silicone cupcake molds can only be used in ovens, ovens and microwave ovens. Never use them directly on gas or electricity, or directly above the heating plate or below the grill.
Step 5. Do not use the right to use a knife or other sharp tools on the silicone cake mold, do not press, pull, or force each other.
Step 6: Silicone cupcake mold (because of static electricity), it is easy to absorb dust. When it is not used for a long time, it is best to put it in a cool place and pack it in a carton.
Link to this article：How To Use Silicone Cupcake Molds?
Reprint Statement: If there are no special instructions, all articles on this site are original. Please indicate the source for reprinting.：Silicone And Casting，Thanks！^^