Automobile sealant strip is one of the important parts of automobiles. It is widely used in door, window, body, seat, sunroof, engine box and trunk. It can be used to produce rubber hinges for installing passenger car luggage compartment doors. It has other functions such as waterproofing and sealing.
Classification of automobile sealant strips:
1. Vulcanized rubber sealing tape
Generally it is made of EPDM material.Excellent overall performance, outstanding ozone resistance, excellent weather resistance, good high temperature and low temperature resistance, outstanding chemical resistance, resistance to a variety of polar solutes, and low relative density.The disadvantage is that it has a large amount of expansion in general mineral oil and lubricating oil, and it is generally a dark-colored product.The operating temperature range is -60～+150℃.With its wide application range and excellent comprehensive performance, it has been recognized by domestic and foreign industry enterprises.
2. Silicone rubber sealing tape
It has outstanding high and low temperature resistance, ozone resistance and weather resistance; it has excellent hydrophobicity and proper air permeability; it has unparalleled insulation performance; it can reach the sanitary level required by food hygiene and can meet the requirements of various colors.The disadvantage is that the mechanical strength is the worst among rubber materials, and it is not resistant to oil.Operating temperature range -100～+300℃.It can be applied to areas with high temperature, cold, strong ultraviolet radiation and middle and high-rise buildings.
3. Neoprene sealing tape (CR)
Compared with other special rubbers, the individual properties are worse, but the overall properties are well balanced.It has excellent weather resistance, ozone resistance, heat aging resistance, oil and solvent resistance, good chemical resistance and excellent flame resistance, and good adhesion.Poor storage stability, hardening will occur during storage, and cold resistance is not good.The relative density is larger.Generally black products.It is used in the environment where oil resistance, heat resistance, acid and alkali resistance are required.The operating temperature range is -30～+120℃.
4. Nitrile rubber sealing strip
The main feature is oil resistance and solvent resistance, but it is not resistant to media such as ketones, esters and chlorinated hydrocarbons. It has good elasticity and mechanical properties.The disadvantage is that it is easy to age and crack in ozone and oxidation, and has poor cold resistance and low temperature resistance.
5. Thermoplastic elastomer sealing tape
It has good elasticity and excellent wear resistance, good oil resistance, wide adjustable range of hardness (Shore A hardness 65～80), excellent mechanical properties (tensile strength, elongation at break), excellent Cold resistance and chemical resistance are intertwined with corrosion performance, and the price of raw materials is higher.It is a recyclable material.The operating temperature range is -60～+80℃.It is suitable for earthquake-prone areas, near railways or factories with high-power cranes and other areas with strong vibrations, as well as areas with strong ultraviolet radiation.
6. Thermoplastic vulcanizate (TPV) sealing tape
It has the flexibility and elasticity of rubber and can be produced by plastic processing methods without vulcanization. The waste can be recycled and reused.It is a material with a wide range of properties. It has good heat resistance and cold resistance, low relative density, oil resistance and solvent resistance similar to neoprene, and it is not very good in compression set and abrasion resistance.The operating temperature range is -40～+150℃.It can be applied to cold, and middle and high-rise buildings.
7. Plasticized polyvinyl chloride (PPVC) sealing tape
The materials are cheap and easy to obtain, with corrosion resistance, wear resistance, acid and alkali resistance and various chemical media, combustion resistance, and high mechanical strength; the disadvantage is that the plasticizer in the matching system is easy to migrate, and it becomes hard and brittle over time. Elasticity, not aging resistance, poor weather resistance and low temperature performance.Generally dark products.It is suitable for occasions where the light is not strong, the temperature changes little, and the weather conditions are not bad.
8. Surface coating materials
It is to coat polyurethane, silicone, polytetrafluoroethylene and other substances on the surface of the sealing strip to replace the surface flocking of the traditional process.The coated sealing strip has good wear resistance and smoothness, especially the sealing strip coated with silica gel surface coating, the surface friction coefficient is small, which is conducive to the sliding of door and window sashes.Suitable for doors and windows with sliding doors and sashes.It is a substitute for traditional siliconized wool tops.
The automotive parts and parts machining, PTJ Shop offers the highest degree of OEM service with a basis of 10+ years experience serving the automotive industry. Our automotive precision shop and experts deliver confidence. We have perfected the art of producing large component volumes with complete JIT reliability, backed by the quality and long-term reliability our customers expect.
Link to this article：High attention must be paid to the maintenance of automobile sealant strips
Reprint Statement: If there are no special instructions, all articles on this site are original. Please indicate the source for reprinting.：Cnc Machining，Thank